Bodno A10From $995
Bodno A20From $1,595
Bodno A30From $1,995
Bodno A40 ProFrom $2,995
vs.
CR80 30 mil PVC cardsFrom $3.99
Adhesive-backed PVC cardsFrom $9.99
Proximity cards (NoMativ)From $14.99
NTAG NFC cards, 100 packFrom $59.00
Buy the softwareDesign and print ID cards on PC and Mac
Bodno
Bodno A5300 Color Ribbon for A20, A30, and A40 Pro Printers
YMCKO · 300 Prints
✓ Fits Bodno A20, Bodno A30, Bodno A40 Pro3 printer models · See compatible printers
Compatible with
Don’t see your printer? Find your printer’s supplies or call (732) 987-5300.
Customers also buy
Specifications
| Brand | Bodno |
|---|---|
| Part number | A5300 |
| Panels | YMCKO |
| Prints per roll | 300 Prints |
| Cost per card | About $0.32 per card |
| Fits | Bodno A20, Bodno A30, Bodno A40 Pro |
About this product
Bodno A5300 Color Ribbon for A20, A30, and A40 Pro Printers - YMCKO - 300 Prints
Common questions
How many cards does one Bodno A5300 Color Ribbon print?
300 single-sided cards per ribbon. If you print on both sides of a card, each card uses two prints, so one ribbon makes 150 two-sided cards.
How many ribbons do I need?
For 500 cards you need 2 ribbons, and for 1,000 cards you need 4, printing on one side. Use the calculator above for your exact number.
What does YMCKO mean on this ribbon?
Y, M and C (yellow, magenta and cyan) print the full-color picture. K prints sharp black text and barcodes. O lays a clear overlay over the card to protect it. Together they print full color on one side of the card.
Which printers does the Bodno A5300 Color Ribbon fit?
It fits the Bodno A20, Bodno A30, Bodno A40 Pro. Not sure which printer you have? Email sales@bodno.com and we’ll confirm it before you order.
Can I use the A5300 in an A10?
I get Error 48 after putting in a new ribbon. What do I do?
Error 48 means the printer could not read the marks on the ribbon, and it is almost never a broken printer. Reseat the ribbon flat and not wound tight, check the gear on the spool for missing teeth, then recalibrate the ribbon sensor with the ribbon out and the cover closed: Printing Preferences › Tool › Calibrate Ribbon LED. Step by step: Error 48 on the A-Series.
Why does my ribbon keep tearing?
If the printer’s test chart tears it too, the print is running past the card edge, so reset Position Calibrate to factory default. If only your design tears it, turn on Rotate 180° and add a light border so solid dark color does not run off the card edge. Still tearing? Ease ribbon tension to −3 and check the spool gear for missing teeth. Full guide: Ribbon tearing or sticking.
Why do black backgrounds print with colored lines?
Large solid dark areas are the hardest thing for any direct-to-card printer. Ease ribbon tension to −3, try Rotate 180°, and lighten the background slightly if you can. More fixes: Streaks, faded or off colors.
Can I run a card through the printer twice?
No. A card that has been through the printer has a clear protective layer on it even if it looks blank, and the ribbon will stick to it and tear.
Should I clean the printer when I change the ribbon?
Yes. Run a cleaning card whenever you change a color ribbon, and any time prints start to look dull. The BB001 cleaning kit has the card, swab and cloth.
How long do color ribbons last if unopened?
Unopened ribbons can last 18–24 months when stored properly. Keep them sealed in original packaging, in a cool, dry place away from sunlight or humidity to preserve print quality.
