Bodno A10From $995
Bodno A20From $1,595
Bodno A30From $1,995
Bodno A40 ProFrom $2,995
vs.
CR80 30 mil PVC cardsFrom $3.99
Adhesive-backed PVC cardsFrom $9.99
Proximity cards (NoMativ)From $369.00
NTAG NFC cards, 100 packFrom $59.00
Buy the softwareDesign and print ID cards on PC and Mac
Magicard
Magicard XM250YMCKOK Color Ribbon for Magicard 400X
YMCKOK · 250 prints
Specifications
| Brand | Magicard |
|---|---|
| Part number | XM250YMCKOK |
| Panels | YMCKOK |
| Prints per roll | 250 prints |
| Cost per card | About $0.60 per card |
About this product
Magicard Color Ribbon - YMCKOK - 250 prints for Magicard 400X Printers
Common questions
How many cards does one Magicard XM250YMCKOK Color Ribbon print?
250 two-sided cards. This is a dual-sided ribbon, so each print covers the front and back of one card.
How many ribbons do I need?
For 500 cards you need 2 ribbons, and for 1,000 cards you need 4. Use the calculator above for your exact number.
What does YMCKOK mean on this ribbon?
The first five panels (yellow, magenta, cyan, black and a clear overlay) print a full-color front. The last K panel prints black on the back, like a barcode or signature line, in the same pass. It needs a printer that prints both sides.
Does this ribbon print HoloKote?
Yes. Magicard printers print HoloKote, a clear watermark you see when you tilt the card, through the overlay (O) panel of this ribbon. There is no extra film or laminate to buy. The Magicard D can also print a custom HoloKote with your own logo. More: What is HoloKote?
Should I clean the printer when I change the ribbon?
Yes. Run a cleaning card and fit a fresh cleaning roller at every ribbon change. Static on PVC cards pulls in dust, and dust dragged under the printhead is what wears it out. More: Why regular cleaning matters.
Why is there a white line on every card?
Print the printer’s own test card. If the line is there too, a printhead element is damaged, and it cannot be cleaned away or repaired, only replaced. Cleaning at every ribbon change, and punching slots after printing instead of before, keeps it from happening. See White line on Magicard printers.
I get a MAGAPI error in Bodno software. What do I do?
In Bodno, open the BOD tab → Printer Drivers, find your Magicard printer, change Print Class to WIN32API, save, and restart Bodno. More: Fix the MAGAPI error.
